Electric rehabilitation training bed
This electric rehabilitation training bed supports standing, backrest, leg, and lateral turning functions. It helps improve circulation, prevent pressure sores, and promote recovery. Ideal for rehabilitation and long-term care use.
Standing Safety System: When initiating the upright standing training sequence, if other sections of the bed frame are not currently in their lowest positions, the system requires these sections to automatically descend to their lowest positions (auto-reset) before the overall forward-tilting operation can be executed. Furthermore, while the bed frame is in the overall forward-tilted (standing) position, the system prevents accidental operation of the backrest (raising/lowering) and leg rest (raising/lowering) functions to ensure patient safety.
The electric rehabilitation training bed is designed to support patient recovery and daily care. It features multiple motorized functions, including standing, backrest elevation, leg elevation, and lateral turning. The standing angle adjusts from 0–80°, helping patients gradually transition from lying to standing. This improves blood circulation, reduces complications, and supports early rehabilitation.
The backrest and leg adjustment functions enhance comfort and assist with daily positioning. The lateral turning function helps prevent pressure sores and reduces caregiver workload. This rehabilitation training bed also promotes muscle activation, improves balance, and supports long-term mobility recovery.
With a stable structure and precise electric control, it is ideal for hospitals, rehabilitation centers, and home care settings. This rehabilitation training bed provides safe and effective support for patient rehabilitation and independence.
Specification:
- Overall Dimensions: 1940 mm × 830 mm
- Bed Surface Dimensions: 1940 mm × 830 mm
- The bed surface features vertical lift capability; height adjustment range: 480–775 mm.
- Adjustable Bed Body Tilt Angle: Trendelenburg position (head-down tilt) minimum angle ≤ 0° to -12°; upright standing angle adjustable from 0° to 85°.
- Equipped with a dedicated footboard to assist patients during standing training; the footboard has a static load capacity of ≥ 1500 N.
- Backrest Angle Adjustment Range: 0°–60°.
- Leg Rest Angle Adjustment Range: 0°–25°.
- Equipped with foldable side rails (guardrails) with a height of no less than 350 mm; rail material: HDPE.
- Features anti-collision rollers at all four corners to protect the bed frame from impact damage. Hooks are provided on both sides of the bed frame for convenient hanging of urine bags, ostomy bags, etc. Mounting ports for IV poles are located at all four corners to facilitate installation.
- Dynamic Load Capacity of Bed Body: ≥ 175 kg.
- Ingress Protection (IP) Rating: ≥ IPX4. Number of Motors: ≥ 5. Dual Power Supply Mode: An internal backup power source allows the bed to continue operating in the event of a mains power failure.
- Equipped with an emergency stop switch. Includes safety restraint belts (straps)—minimum of 3 belts provided—each with a static load capacity of ≥ 500 N.
- Power Cord: Optional.
Additional information
| Overall Dimensions | 1940 mm × 830 mm |
|---|---|
| Bed Surface | 1940 mm × 830 mm |
| Height adjustment range | 480–775 mm |
| Body Tilt Angle | Trendelenburg position (head-down tilt) minimum angle ≤ 0° to -12°; |
| Backrest Angle Adjustment Range | 0°–60° |
| Leg Rest Angle Adjustment Range | 0°–25° |
| Side rails material | HDPE |
| Dynamic Load Capacity of Bed Body | ≥ 175 kg |
